![]() |
|
|||||||
| Konica-Minolta legacy The essentials of imaging. Forum for past Konica-Minolta cameras and equipment. |
|
|
|
|
Thread Tools |
|
|
#1 |
|
Senior Member
Join Date: Feb 2003
Location: Outside the Dry Box.
Posts: 16,342
|
just find it strange, haven used the HS5600 for about 1 month. went to on it to test the batts and it shows the low batt sign, so changed to 1 set of dunno how long never charged 2500mah, same, den tested with another set of 2000, same... same to the set of 1600mah which i charged the night before... thought all my batteries are dead... can't find alkaline batteries around office...
so after doing some things i came back to check the hs5600, strange enough... it now uses the 2500 without any problem... charges as per normal... is there something wrong with my hs5600 or is that something normal?
__________________
Logging Off Permanently. Those who need to contact me will know where to contact me. |
|
|
|
|
#2 |
|
Senior Member
Join Date: Mar 2004
Posts: 6,019
|
thats strange...
![]() |
|
|
|
|
#3 |
|
Member
Join Date: Nov 2004
Location: BB West
Posts: 713
|
My 7i also reject those NiMH batts and show low batt even after fully charge. But my 5600 ok with them even low batt show on my 7i. Maybe need to get a refresh charger to find out the real reason.
![]()
__________________
Believe in yourself, dont trust other so much. :) |
|
|
| Sponsored Link |
|
|
#4 |
|
Senior Member
Join Date: Jan 2002
Location: Clementi
Posts: 6,188
|
I tried, dun have a problem.... mine are new GP 2300mAh batteries, freshly charged. Maybe your batteries did not contact the metal contacts properly the first time around?
|
|
|
|
|
#5 |
|
Senior Member
Join Date: Feb 2002
Location: L2TPYSG
Posts: 4,514
|
thought alkaline runs better on flash cos they're 1.5V while nimh max is 1.2?
not sure about your flash but have similar encounters with canon and olympus flashes
__________________
"I'm... dreaming... of a wide... angle~ Just like the ones I used to know~" |
|
|
|
|
#6 |
|
Senior Member
Join Date: Feb 2002
Location: L2TPYSG
Posts: 4,514
|
and to add on did u try the age-old method of rotating ur batt in the compartment to scrape off any oxide buildup? LOL sounds dumb but it works
__________________
"I'm... dreaming... of a wide... angle~ Just like the ones I used to know~" |
|
|
|
|
#7 |
|
Member
Join Date: Jan 2002
Location: Bukit Batok West Avenue 2
Posts: 1,739
|
Happens to my 3600, one reason i was reluctant to sell it... dun wanna sell someone a potentially defective product...
Reminds me, anyone wanna try the new dunnoe wat oxide batteries? They suppose to be 1.7v when fresh and will stabalise to 1.5... Non-rechargable and think they cost like about $2 a piece... keep your eyes open on your supermarket trips... You could spot them. |
|
|
|
|
#8 | |
|
Senior Member
Join Date: Jan 2002
Location: Clementi
Posts: 6,188
|
How long do they last? $2 a piece is very ex leh... that means each time change one set for flash is about $8.... ![]() |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|