Page 2 of 2 FirstFirst 12
Results 21 to 28 of 28

Thread: anyone using Emoblitz flash??

  1. #21
    Senior Member josho's Avatar
    Join Date
    Nov 2004
    Location
    Jln Teck Whye
    Posts
    2,110

    Default

    Can I ask a stupid qtn? Is this a good flash compare to Suntax 328 dtz?

  2. #22
    Member
    Join Date
    Nov 2004
    Location
    Hougang
    Posts
    222

    Default

    Quote Originally Posted by rogersk8ter
    I used F2.8 with speed of 1/60. This is the recommanded setting for Emoblitz.
    Your picture will turn out bad if you use other settings cos the flash sensor will output intensity base on these settings.

    Yes, i did a bounce to the ceiling....but do remember to include the extra distance and hence i adjusted to 'tele" setting for the flash. hope i made myself clear.

    tsin: Yup, mounted on hotshoe, used bounce and swivel already. Even used bounced with omnibounce!

    roger: so your setting of the aperture and shutter is fixed no matter what the distance and light condition (and colour of the ceiling) is? Would the flash increase output or decrease output automatically? Thanks for the clarification!

  3. #23

    Default

    Quote Originally Posted by snapMan
    tsin: Yup, mounted on hotshoe, used bounce and swivel already. Even used bounced with omnibounce!

    roger: so your setting of the aperture and shutter is fixed no matter what the distance and light condition (and colour of the ceiling) is? Would the flash increase output or decrease output automatically? Thanks for the clarification!
    yes aperature and speed are fixed. it serve as a reference point for the flash. the sensor will measure the lighting condition and output accordingly.

  4. #24

    Default any omnibounce fitting for emoblitz ds328az?

    hi guys, was wondering if there's any omnibounce fitting for emoblitz ds328az? thanks alot.

  5. #25

    Default

    A little off topic here..
    Interested to get the Emoblitz flash for my FZ20, wonder how much does it cost and where can I get it? What about Sunpak 383S? How is this compared to the Emoblitz?

  6. #26
    Moderator John Teoh's Avatar
    Join Date
    Oct 2004
    Location
    Tampines, Singapore, Singapore
    Posts
    2,059

    Default

    Quote Originally Posted by keyneslee
    hi guys, was wondering if there's any omnibounce fitting for emoblitz ds328az? thanks alot.
    nope. You need to buy and fit your own.

    Cheers
    John

  7. #27
    Account Suspended
    Join Date
    Dec 2004
    Location
    Little Red Dot
    Posts
    1,064

    Default

    Quote Originally Posted by rogersk8ter
    yes aperature and speed are fixed. it serve as a reference point for the flash. the sensor will measure the lighting condition and output accordingly.
    The aperture and shutter speed is fixed only if you have the "external flash" settings in the menu at "preset" mode.
    Change it to manual and you can change your aperture and shutter speeds when using A/S/M modes.

  8. #28
    Member
    Join Date
    Feb 2004
    Location
    Bedok
    Posts
    716

    Default

    Just a question for the Emoblitz 328 users.. Can you manually adjust the flash power like the Panasonic flash? ie. High/ Med/ Low etc.. May want to get this flashgun because of the sync-cord and rail...

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •