Glen Coe photoshopped..

reactan · 1st June 2004

Hi all, i recently complained abt poor results after scanning from slides... here:previous thread

so i did so PS...do let me know what you all think!! The one on top is the original.

btw, cant seem to get rid of the flare from the white shirt...its not in the original slide

cheers!
Al

hanoman · 2nd June 2004

I do have the same problem scanning my slide too. The colour will be slightly purple, sometimes the colour looks dull. Always need to play a bit in the PS.

The above photos looks so much different after some tweaking,

reno77 · 2nd June 2004

Your scanner might be dusty. I got a coolscan and the mirror get dusty quite fast. To clean the mirror i scan a picture, when the software reads ~100%, I turn it off and remove the film adapter. The mirror is now in the front. I use some cotton buds, drip some lens cleaning fluid on them and gently wipe the mirror.

PS : Just read your old thread, tell the shop to clean their scanner

1st June 2004	#1
reactan Member Join Date: Jan 2004 Location: Bedok Posts: 243	Glen Coe photoshopped.. Hi all, i recently complained abt poor results after scanning from slides... here:previous thread so i did so PS...do let me know what you all think!! The one on top is the original. btw, cant seem to get rid of the flare from the white shirt...its not in the original slide cheers! Al Last edited by reactan; 1st June 2004 at 09:42 PM.

2nd June 2004	#3
reno77 Member Join Date: Jan 2002 Location: Bedok Reservoir Posts: 881	Your scanner might be dusty. I got a coolscan and the mirror get dusty quite fast. To clean the mirror i scan a picture, when the software reads ~100%, I turn it off and remove the film adapter. The mirror is now in the front. I use some cotton buds, drip some lens cleaning fluid on them and gently wipe the mirror. PS : Just read your old thread, tell the shop to clean their scanner Last edited by reno77; 2nd June 2004 at 11:51 AM.

2nd June 2004	#2
hanoman Member Join Date: Dec 2002 Location: a.little.red.dot Posts: 230	I do have the same problem scanning my slide too. The colour will be slightly purple, sometimes the colour looks dull. Always need to play a bit in the PS. The above photos looks so much different after some tweaking,